Skip to Content
Home / Downtime calculator
Fleet downtime calculator

What is sensor downtime costing your fleet?

A failed ABS, NOx or temperature sensor can take a truck off the road for hours or days: towing, diagnostics, a driver waiting and loads that do not move. Enter your own numbers to see what sensor-related breakdowns cost you in a year, and what you could save by cutting the time each one takes.

Takes 1 minuteRuns in your browserNothing is stored

Your fleet

How many trucks you run and how often a sensor fault takes one off the road.

Time off the road

Count from the breakdown until the truck is earning again, including any wait for the part.

Cost per breakdown

Direct costs each time it happens. Leave a field at 0 if it does not apply.

What if?

Move the slider to see the saving if each breakdown took less time to fix.

Cut hours off the road by30%
Sensor-related downtime costs your fleet
$0

per year, based on the figures you entered

$0Per truck
$0Per breakdown
0Hours lost
  • Lost revenue$0
  • Driver pay while waiting$0
  • Tow and roadside$0
  • Diagnostics and labor$0
  • Repeat repairs$0
Cut hours off the road by 30%$0

Potential saving per year from shorter breakdowns alone, using your figures.

Estimate only. The example values are placeholders: replace them with your own fleet's figures.

Where the cost comes from

A sensor costs little. A down truck does not.

The part is usually the smallest number on the bill. Most of the cost is time: a truck that is not moving and a driver who is not driving.

01 · Lost revenue

The truck is not earning

Every hour off the road is an hour of revenue gone, plus missed delivery windows, rebooked loads and unhappy customers.

02 · Driver time

The driver is still paid

Hourly drivers, detention and layover pay keep running while the truck waits for a tow, a bay or a part.

03 · Tow and diagnostics

Getting it fixed

Roadside call-outs, towing, scan-tool time and labor add up quickly, especially away from your own shop.

04 · Waiting for parts

The part is not on the shelf

If the right sensor is not in stock, a 1-hour repair turns into a 1-day or 2-day wait.

05 · Repeat repairs

The wrong part, fitted twice

A mismatched or low-quality sensor can mean a second breakdown, a second tow and a second round of labor.

06 · Compliance

Warning lamps on inspection

A lit ABS or emissions warning lamp can lead to a write-up at roadside inspection, more time lost before the truck is cleared.

Keep the number down

Three ways to cut sensor downtime.

01

Fit the right part first time

Match the OE or competitor number to the exact replacement before the truck goes into the bay, and avoid repeat repairs.

Search 2,200+ cross references
02

Keep critical sensors on the shelf

Stock the ABS, NOx and temperature sensors your fleet uses most, so a breakdown never waits on shipping.

Ask about a stocking quote
03

Buy parts you can rely on

PEX sensors are built to the OE standard, individually screened before they ship and backed for 3 years / 100,000 miles.

How we validate every sensor

How the calculator works

  • Breakdowns per year = trucks × breakdowns per truck
  • Cost per breakdown = hours × (revenue + driver pay) + tow + diagnostics
  • Repeat repairs add the same cost again for the share of breakdowns that need a second fix.
  • The "what if" saving cuts only the hours, for every breakdown, including repeats.

About the numbers

The starting values are placeholders, not industry averages: replace them with your own. For context, the American Transportation Research Institute puts the average cost of operating a truck at $2.336 per mile in 2025 (ATRI, 2026). Everything runs in your browser and nothing you enter is saved or sent, unless you choose to request a quote.

FAQ

Questions about downtime costs.

What counts as sensor-related downtime?

Any time a truck cannot work because of a failed or faulty sensor: ABS and wheel speed, NOx, temperature, pressure, speed and position or brake wear. It includes the time spent waiting for a tow, a service bay or the replacement part.

Where do the example numbers come from?

They are placeholders to show how the calculator works, not averages for your fleet. Your maintenance records, telematics and invoices will give you much better figures.

How can I lower my downtime cost?

Fit the correct replacement the first time, keep your most common failure sensors in stock, and choose parts with a solid warranty. Cutting the hours each breakdown takes usually saves more than cutting the price of the part.

Does PEX store the figures I enter?

No. The calculator runs entirely in your browser. If you click Request a fleet quote, only your estimated annual total is added to the subject line of the contact form, and you can edit it before sending.

How do I find the PEX equivalent of a failed sensor?

Search the OE, competitor or PEX number in Cross Reference. If it does not show up, send us the number and our team will match it.

Find the right sensor before the next breakdown.

Search 2,200+ cross references, or send us your fleet's part list for a quote.