411.586OE-grade wheel speed sensor for ABS, traction and stability systems.
Reads the tone ring at the wheel end and feeds wheel-speed data to the ABS control module. Built and validated to original-equipment signal and durability standards.

Does 411.586 replace your number?
Type the OE or aftermarket number from the old part or your parts list. Spaces, dots and dashes don't matter.
Numbers this part replaces.
Tap any number to copy it. Filter by make to see only the numbers for your fleet.
MAZDA1 NO.
Technical detail.
*Typical for this product line; terms may vary by part, application and purchase agreement. Confirm coverage with our team before ordering.
Dimensions, connector or resistance values
Send us the application or the number from the old part and our team will confirm the details before you order.
Ask our teamWhen it starts to fail.
ABS lamp on
A weak or missing signal from one wheel end is one of the most common reasons the ABS warning lamp stays lit.
Wheel speed fault codes
Codes for an erratic signal, open circuit or a speed mismatch between wheels usually point to the sensor, its cable or the tone ring.
Erratic ABS at low speed
ABS cycling during gentle stops, or trailer ABS that drops in and out, often traces back to sensor gap or signal loss.
Fit it right first time.
Install checklist
- Inspect the tone ring. A cracked, corroded or dirty ring causes the same faults as a failed sensor.
- Fit a new sensor clip and apply the specified lubricant to the clip and bore.
- Push the sensor in until it touches the tone ring. Wheel-bearing end play sets the final gap.
- Route the cable away from heat and moving parts, secure it, and seal the connector.
Quick test before you replace
Check coil resistance at the connector, then spin the wheel and look for a clean signal. If the sensor tests good, inspect the tone ring, cable and connector before replacing it.
Common questions.
Will 411.586 replace my Mazda L2064370XB?
Yes. L2064370XB is listed as a cross reference for 411.586. Confirm fitment by OE number or chassis before ordering, or send us the number and we will confirm it.
What if the cable doesn’t reach?
PEX offers ABS extension cables in several lengths. Tell us your application and we will confirm which one matches.
How do I get pricing?
PEX sells through quotes, not online checkout. Send the part number and quantity and our team typically responds within 1–2 business days (Mon–Fri, 8–5 CST).
Can I order in volume for a fleet or distribution?
Yes. Fleets and distributors can request quotes for volume orders. For ongoing supply, see Stock PEX or contact us directly.
Same family, same standard.
Need 411.586 for your fleet?
Send the part number and quantity. Our team confirms fitment and comes back with pricing and lead time.