Skip to Content
PEX · ABS wheel speed sensor

412.383Right-angle wheel speed sensor for heavy-duty air brakes.

OE-grade passive sensor that feeds wheel-speed data to the ABS, traction and stability systems on tractors, trailers and vocational trucks. Built and validated to original-equipment signal and durability standards.

Replaces Bendix 801549 and 26 more numbers
27
Cross references
7
Makes
60″
Harness
3 yr
Warranty*
Request a quote
PEX 412.383 right-angle ABS wheel speed sensor with 60 inch harness, Deutsch DT04 connector and sensor clip
Fitment check

Does 412.383 replace your number?

Type the OE or aftermarket number from the old sensor or your parts list. Spaces, dots and dashes don't matter.

Start typing to check against 27 listed numbers.
Cross references

Numbers this part replaces.

Tap any number to copy it. Filter by make to see only the numbers for your fleet.

BENDIX1 NO.

FORD2 NO.

FREIGHTLINER3 NO.

MACK2 NO.

NAVISTAR14 NO.

STERLING2 NO.

VOLVO3 NO.

Specifications

Technical detail.

PEX reference412.383
Sensor typePassive electromagnetic (WS-24 style)
Body style90° right-angle
Harness length60 in (1524 mm)
ConnectorDeutsch DT04, 2-way sealed
Operating range−40 °F to 320 °F
ApplicationHeavy duty, air brake
Warranty3 years / 100,000 miles*

*Typical for this product line; terms may vary by part, application and purchase agreement. Confirm coverage with our team before ordering.

90° RIGHT-ANGLE HEAD HARNESS · 60 IN / 1524 MM PASSIVE SENSING FACE DEUTSCH DT04 2-WAY · SEALED
Technical illustration.
Right-angle head, 60 in harness and sealed Deutsch DT04 connector. Not to scale.
Know the signs

When a wheel speed sensor is failing.

ABS lamp on

A weak or missing signal from one wheel end is one of the most common reasons the ABS warning lamp stays lit.

Wheel speed fault codes

Codes for an erratic signal, open circuit or a speed mismatch between wheels usually point to the sensor, its cable or the tone ring.

Erratic ABS at low speed

ABS cycling during gentle stops, or trailer ABS that drops in and out, often traces back to sensor gap or signal loss.

Installation

Fit it right first time.

Install checklist
  1. Inspect the tone ring. A cracked, corroded or dirty ring causes the same faults as a failed sensor.
  2. Fit a new sensor clip and apply the specified lubricant to the clip and bore.
  3. Push the sensor in until it touches the tone ring. Wheel-bearing end play sets the final gap.
  4. Route the cable away from heat and moving parts, secure it, and seal the connector.
Quick test before you replace

Check coil resistance at the connector, then spin the wheel and look for a clean AC signal. If the sensor tests good, inspect the tone ring, cable and connector before replacing it.

Questions

Common questions.

Will 412.383 replace my Bendix 801549?

Yes. 801549 is listed as a cross reference for 412.383. Confirm fitment by OE number or chassis before ordering, or send us the number and we will confirm it.

What if the harness doesn't reach?

PEX offers ABS extension cables, such as 411.048 and 411.184 (6.0 ft / 1.80 m). Tell us your application and we will confirm which one matches.

How do I get pricing?

PEX sells through quotes, not online checkout. Send the part number and quantity and our team typically responds within 1–2 business days (Mon–Fri, 8–5 CST).

Can I order in volume for a fleet or distribution?

Yes. Fleets and distributors can request quotes for volume orders. For ongoing supply, see Become a Partner or contact us directly.

Quote, not checkout

Need 412.383 for your fleet?

Send the part number and quantity. Our team confirms fitment and comes back with pricing and lead time.

412.383 · ABS sensorRequest a quote
Copied