Skip to Content
PEX · ABS wheel speed sensor

413.582OE-grade wheel speed sensor for ABS, traction and stability systems.

Reads the tone ring at the wheel end and feeds wheel-speed data to the ABS control module. Built and validated to original-equipment signal and durability standards.

Replaces Man 81271206149
1
Cross references
1
Makes
HD
Heavy duty
3 yr
Warranty*
Request a quote
Illustration of a PEX ABS wheel speed sensor
Illustration · actual part may differ
Fitment check

Does 413.582 replace your number?

Type the OE or aftermarket number from the old part or your parts list. Spaces, dots and dashes don't matter.

Start typing to check against 1 listed number.
Cross references

Numbers this part replaces.

Tap any number to copy it. Filter by make to see only the numbers for your fleet.

MAN1 NO.

Specifications

Technical detail.

PEX reference413.582
DescriptionABS sensor
CategoryABS wheel speed sensor
ApplicationHeavy duty
Cross references1
Makes listed1
Warranty3 years / 100,000 miles*

*Typical for this product line; terms may vary by part, application and purchase agreement. Confirm coverage with our team before ordering.

Need more detail?

Dimensions, connector or resistance values

Send us the application or the number from the old part and our team will confirm the details before you order.

Ask our team
Know the signs

When it starts to fail.

ABS lamp on

A weak or missing signal from one wheel end is one of the most common reasons the ABS warning lamp stays lit.

Wheel speed fault codes

Codes for an erratic signal, open circuit or a speed mismatch between wheels usually point to the sensor, its cable or the tone ring.

Erratic ABS at low speed

ABS cycling during gentle stops, or trailer ABS that drops in and out, often traces back to sensor gap or signal loss.

Installation

Fit it right first time.

Install checklist
  1. Inspect the tone ring. A cracked, corroded or dirty ring causes the same faults as a failed sensor.
  2. Fit a new sensor clip and apply the specified lubricant to the clip and bore.
  3. Push the sensor in until it touches the tone ring. Wheel-bearing end play sets the final gap.
  4. Route the cable away from heat and moving parts, secure it, and seal the connector.
Quick test before you replace

Check coil resistance at the connector, then spin the wheel and look for a clean signal. If the sensor tests good, inspect the tone ring, cable and connector before replacing it.

Questions

Common questions.

Will 413.582 replace my Man 81271206149?

Yes. 81271206149 is listed as a cross reference for 413.582. Confirm fitment by OE number or chassis before ordering, or send us the number and we will confirm it.

What if the cable doesn’t reach?

PEX offers ABS extension cables in several lengths. Tell us your application and we will confirm which one matches.

How do I get pricing?

PEX sells through quotes, not online checkout. Send the part number and quantity and our team typically responds within 1–2 business days (Mon–Fri, 8–5 CST).

Can I order in volume for a fleet or distribution?

Yes. Fleets and distributors can request quotes for volume orders. For ongoing supply, see Stock PEX or contact us directly.

Quote, not checkout

Need 413.582 for your fleet?

Send the part number and quantity. Our team confirms fitment and comes back with pricing and lead time.

413.582 · ABS sensorRequest a quote
Copied