WK607OE-grade brake pad wear sensor.
Warns the driver when brake pads reach their wear limit, so pads are replaced before the rotor is damaged. Built to original-equipment specification.
Does WK607 replace your number?
Type the OE or aftermarket number from the old part or your parts list. Spaces, dots and dashes don't matter.
Numbers this part replaces.
Tap any number to copy it. Filter by make to see only the numbers for your fleet.
MERCEDES1 NO.
Technical detail.
*Typical for this product line; terms may vary by part, application and purchase agreement. Confirm coverage with our team before ordering.
Dimensions, connector or resistance values
Send us the application or the number from the old part and our team will confirm the details before you order.
Ask our teamWhen it starts to fail.
Pad wear warning on
The warning comes on when the sensor loop is worn through or its circuit opens.
Warning after a pad change
A sensor that was reused or damaged during the job can keep the warning on.
Intermittent warning
Chafed wiring or a loose connector can switch the warning on and off.
Fit it right first time.
Install checklist
- Replace the sensor whenever you replace the pads. Most are designed for one pad life.
- Seat the sensor fully in the pad or carrier as designed.
- Route and clip the wire clear of the rotor and caliper movement.
- Clear the warning and confirm it stays off after a test drive.
Quick test before you replace
Check the sensor loop for continuity. An open circuit with pads above their wear limit points to damaged wiring or a connector fault.
Common questions.
Will WK607 replace my Mercedes 2205401517?
Yes. 2205401517 is listed as a cross reference for WK607. Confirm fitment by OE number or chassis before ordering, or send us the number and we will confirm it.
Do I need a new sensor with every pad change?
In most cases, yes. Wear sensors are designed for one pad life, and a reused sensor can trigger false warnings.
How do I get pricing?
PEX sells through quotes, not online checkout. Send the part number and quantity and our team typically responds within 1–2 business days (Mon–Fri, 8–5 CST).
Can I order in volume for a fleet or distribution?
Yes. Fleets and distributors can request quotes for volume orders. For ongoing supply, see Stock PEX or contact us directly.
Same family, same standard.
Need WK607 for your fleet?
Send the part number and quantity. Our team confirms fitment and comes back with pricing and lead time.